Gear fit won’t turn on

Gear fit won’t turn on. Gear fit is an advantageous gadget that has many unique features. Most of the time, little troubles occur with it, and the big one is that it stops turning on. So it would be best if you solved it immediately.

If you face it the first time or regularly if it is happing, then you have to examine the battery condition, Checkout the software update, and turn off all the statuses of all extra applications in the background.

If you are not more intimate with these, you have to get familiar with them because it helps you in several conditions regarding the gear fit. So if you want to get information, then read the below points.

Gear fit won’t turn on

It is not a huge problem. You can rapidly sort this issue. So if it is not turning on, you must charge the battery. If it is low, Forcibly stop the background application and many more. All are in the below section.

So, To get rid of this type of trouble instantly, you must read the points in the below section with total concentration and do not skip any points too. So let’s start reading them now.

Ascertain the battery level

ascertain the battery level

If the samsung gear fit watch stops turning on, then the best solution is to ascertain its battery level of it.

Because most of the time user can not examine the battery level of the gear fit, then after some hours, it turns off completely and also does not turn on by pressing the power button.

So at this spot, you must connect the charger with it and wait until it stores charging correctly.

When the battery level increases, you can disconnect it and use it on different occasions without effort.

Incapacitate the useless apps

I am not saying that all applications are useless, All are essential for the system, but few work all the time because when the user closes the application but in the background, it never stops, which is also a cause behind this mess.

So, Background apps are consuming more battery, and due to excessive reduction of the battery level, the gear fit stops turning on. So you need to force stop the application after usage if you want an immediate solution.

Examine the battery’s condition

If you attach the charger with the Samsung gear fit and wait too, but the battery level remains still at zero percentage, then it means that the battery’s condition is very worst now, so the first task is to purchase a new battery.

Note that local bases manufacture batteries that can not adjust on it, so you can only use the original battery for the gear fit that is only available in the official stores of Samsung.

Restart the gear fit

restart the gear fit

If it happens more than once, then you should need a rapid troubleshoot, and restarting is the best ever rapid troubleshoot, so now you have to reset it if you want to fix all temporary defects of the settings.

Next, you have to press and hold long the power button of the  Samsung ear fit for 7 seconds and wait until the gear starts automatically.

After this process, the gear set will be adjusted to its suitable options, and the trouble will sort out in a few minutes.

Keep the firmware up to date

The old version of the firmware creates much trouble during tasking. That is why most users prefer the up-to-date version.

So, if you are using the previous version, the Samsung gear can not start quickly or may not turn on. So now you have to update its firmware version.

After this update, not only will you turn on the trouble will solve, but you can experience more amazing performance and speed than the older one.

You should be aware next time you see any firmware update, then never skip it or ignore it. You just need to install it and get a non-distractive experience.

Pair it accurate

Not accurate pairing also causes the turning-on problem, so if you want the non-interrupted tasking on your gear, then you have to pair it properly.

First of all, go to the setting of the phone and check the Bluetooth option. Where you can see the status of the gear and whether it is connected or not, it may not be connected.

So now you have to turn the Bluetooth off and then turn it on. Complete the pairing procedure of the gear again until it is connected perfectly. After this, the gear fit work numerously.


At the end of this article, I hope you will understand all parts of this and also be satisfied with the hard work of research. I hope best that after reading this, you can sort it out and share it with the affected people.

Thanks a lot from the deep of my heart for reading.

Related Guides